Pass Doors and Breakaway Bottom Doors

Contact us about this product

Pass doors

Pass doors and breakaway bottom doors.

Download Product Brochure

Pass Doors

Pass doors are ideal in applications where space is too limited for the installation of a standard entry door. They conserve energy by allowing building access via a smaller opening versus the entire sectional door, this minimizes wear and tear on the door as well saves electric operator cycles. In inclimate weather, the heat or cold distribution between inside and outside of the building is minimized, conserving additional energy costs.

Available On 3720, 3722, 3724, 3200 and 3220 insulated models as well as 520 and 524 series non-insulated models


Break-away Bottom Sections

Break-away bottom sections will release from the track and swing up to a full 45 degree angle inward or outward, preventing further damage to the door.

Available On 3724, 3722, 3720, 3718, 3717, 3220, and 3200 models as well as all 520 series and all 524 series.


Features - Pass Door

welded aluminum frame - pass door Welded aluminum frame with shiplap design affords added strength and durability while providing a weather-tight door seal. Rain cap feature protects door entrance against accumulated water during rain showers.
geared hinge - pass door Geared hinge ensures smooth operation and enhances longevity of the pass door.
closer - pass door Commercial door closer ensures safe and quiet closure.
continuous boxed channel Continuous boxed channel bottom rail adds additional strength against wind and horizontal deflection.

Features - Break-away Bottom Section - View Video

  Clopay's Break-Away Bottom Section releases from the track and will swing up to a full 90 degree angle inward or 45 degrees outward, preventing further damage to the door.
  Bottom section snaps back into place in less than a minute.
  Inside of section has fiberglass protective panel to prevent damage to the door.
  Optional inside slide lock provides additional security. Padlock may be applied.
  • Doors must have at least 24" of hi-lift.
  • 36" of headroom required.
  • Not compatible with door drop safety device/bottom brackets.
  • Not compatible with doors requiring a double torsion shaft
  •  Warranty: 1 Year Limited Construction


    Models BIM Shop Drawing Specification Literature (PDF) Instruction Manual (PDF) Warranty
    Aluminum — Polycarbonate 2 inch x 2 inch
    Model 950